|
|
|
 |
|
PIR Motion Sensor For Lights, Model No. IS-9E
PIR Lights Stand Alone Type
220 VAC Mains (Upto 1000W Incandescent) (300W Fluorescent Max.)
General Information
Motion sensor is a fully automatic indoor and outdoor security/courtesy light controller capable of controlling up to 1000W incandescent or 30W x 10 fluorescent of lighting. At night, the built in passive infrared (PIR) motion sensor turns on the connected lighting system when it detects motion in its coverage area. During the day, the built in photocell sensor saves electricity by deactivating the lights.
An adjustable time lets you select how long the light stays on after activation. The LITE adjustment determine at what light level the lighting system will start operating when you set the motion sensor to automatic mode, |
Features
• Weatherproof - IP44
• Time & LUX Adjustment
• Patented Modern Design
• Automatic Operation
• Saving of Electricity |
Applications
• Car Park
• Drive ways
• Stair ways
• Entrances
• Corridors |
IS9E |
PIR Lights Specifications |
IS9E |
Power Requirement |
AC 220 ~ 240V / 50Hz |
Lighting Load |
Max 1,000W Incandescent
or Max 300 W Fluorescent |
Detection Angle |
Up to 120° at 20° C |
Detection Distance |
Min. 14M at 20° C |
Swiveling Angle |
Horizontal 70°
Vertical 35° |
Mounting Height |
Recommended at 1.8 ~ 2.0M (5.9 ~ 6.6 Ft) |
Wall Switch Control |
On / Off |
Sensor Operation |
Auto |
Time Adjustment |
From ( 10 ± 5) sec. to ( 4 ± 1) minutes |
Lux Adjustment |
Approx. 0 ~ 1,000Lux |
Operating Temperature |
-20° C ~ +40° C |
Warm Up Time |
About 1 min |
Protection Class |
II |
Protection Degree |
IP44 |
|
|
|
| |
|
|
