Automatic Light System a-es6

The A-ES6 is an innovative 360° ceiling mount indoor motion SenSwitch designed for automatic lighting control and energy management of industrial, commercial and residential applications. Lights will be switched on automatically when A-ES6 detects the human body motion. Light will be switched off automatically if no motion is further detected before the delay time expire.

By utilizing a specially designed omni-directional infrared sensor and fresnel lens, this SenSwitch is able to switch on the light when people enters its extensive detection coverage from any direction.

A built-in photocell sensor with different threshold can be set to enable the control function based on the ambient light level. Different light-on delay times can be selected by easy jumper head placement.


Power Requirement : 110/230 VAC, 50/60 Hz

Max. Load : 16A @ 250 VAC Resistive

Mounting height : 2.4~3.6 m (8 ~ 12 ft)

Detection Angle : 360° around

Detection speed : 0.1~3.0 m/sec.

Detection range : 12 meter (40 ft) at 25°C

Delay time : 5″/30″/1’/3’/5’/20′ jumper selection

Infrared sensor : Omni-directional, dual element

Light sensor : CdS photocell

Op. Humidity : Max 100% RH

Op. Temperature : -20° – + 50°C (-4° – + 122°F)

Dimensions : 100 x 100 x 46 mm


Car Park,Corridor, Dining Area, Individual Cabins, Large Cabins, Lift Lobby, Lifts, Living Room, Lobbies, Meeting Rooms, Pantry, Reception Areas, Rest Room, Small Offices, Stairways, Stores,Veranda.

Quick Enquiry